Smart LUA script processing, bi-directional MQTT messaging and new hardware added to the Ixxat CAN@net NT and CANbridge series
The Ixxat® CAN@net NT and CANbridge NT product families enable smart and seamless CAN-based networking on-site and remotely. The CANbridge NT enables easy coupling of up to four CAN and CAN-FD networks using filter and translation rules. Network wiring can be simplified through tree and star topologies, and all connected segments are protected thanks to electrically isolated bus interfaces. All CAN@net NT products come with an additional Ethernet interface, allowing very distributed networks by coupling up to four CAN@net NT devices using Ethernet. CAN@net NT products also allow remote access to CAN and CANFD networks via Ethernet and PC.
New SP2 functionality powers up the CAN@net NT and CANbridge series
The new Service Pack 2 introduces enhanced "Action Rules" programming for flexible definition and execution of events and actions for all CAN@net NT and CANbridge products. Based on LUA script processing, these user-defined actions can be triggered upon e.g. pre-defined message content or status information.
The Ethernet interface of the CAN@net NT series enables direct cloud connectivity via the implemented MQTT protocol. In SP2, bi-directional MQTT messaging is introduced. In addition to transmitting e.g. alarms and status information to mobile devices, messages can now also be received from the cloud for LUA scriptbased pre-processing, plausibility checking and transmission to the CAN bus.
CAN@net NT 100 – new connectivity
HMS also introduces a new hardware – CAN@net NT 100 – that offers a D-Sub 9 network connector for CAN/CAN-FD network connectivity, complementing the existing CAN@net NT 200 and 420 products that both feature screw terminals. The CAN@net NT 100 is a direct successor of the older CAN@net II which means that existing customers can exchange installed CAN@net II units in existing systems with CANnet 100 NT and benefit from all the new functionality provided in SP2.
Learn more about the new Service Pack 2 functionality and CAN@net NT 100 at www.ixxat.com/bridges
HMS Networks is the leading independent supplier of solutions for industrial communication and the Industrial Internet of Things. HMS develops and manufactures products under the Anybus®, Ixxat® and Ewon® brands. Communication solutions for building automation are offered through the subsidiary Intesis.
Development and manufacturing take place at the headquarters in Halmstad, and in Ravensburg, Nivelles, Igualada and Wetzlar. Local sales and support are handled by branch offices in Germany, USA, Japan, China, Singapore, Italy, France, Switzerland, Spain, India, UK, Sweden, Finland, South Korea and UAE, as well as through a worldwide network of distributors and partners. HMS employs over 600 people and reported sales of SEK 1,366 million in 2018. HMS is listed on the NASDAQ OMX in Stockholm, category Mid Cap, Information Technology
HMS Industrial Networks GmbH
Emmy-Noether-Str. 17
76131 Karlsruhe
Telefon: +49 (721) 989777-000
Telefax: +49 (721) 989777-010
http://www.anybus.de
Telefon: +46 (35) 172914
E-Mail: ahn@hms.se
MEPAX
Telefon: +34 (695) 2020-02
E-Mail: j.reitmaier@mepax.com
