-
High precision cooled laser diodes
Laser diodes in detector/laser applications require cooling. The miniature or multi-stage Peltier elements of P&N Europe are particularly suitable for this. These elements are suitable for various cooling and heating applications where only a limited area and a small amount of cooling or heating is involved. Peltier elements from P&N Europe generate high cooling power, so that the temperature can be set precisely. The great advantages of these Peltier elements are durability, reliability and most important quality. When using lasers, it is important that the composition is free of impurities. P&N Europe has special cleaning procedures and provides suitable packaging. P&N Europe develops the perfect solution for customers, as well…
-
Climate Chambers with Peltier Technology
P&N Europe designs and manufactures a variety of thermoelectric assemblies for customers in a wide range of applications. Climate chambers are one of the most popular applications for using P&N Europe’s coolers. P&N Europe’s thermoelectric coolers are used to regulate temperature inside climate chambers. They are designed in such a way that after installation to a chamber, the interior of the cabinet is sealed against the outside. The heat is absorbed and dissipated by heat exchangers, which can be equipped with fans on both the cold side (inside) and the hot side (outside). Coolers from P&N Europe are highly reliable, maintenance-free and have outstanding performance. The operation is almost wear-free…
-
Flexible mobile anechoic chambers for demanding measurements
In the most areas of electrical engineering, demanding measurement tasks require a defined and interference-free environment for highly accurate measurement results. The measurement chamber concept developed by Telemeter Electronic offers customers a flexible measuring solution that is always tailored to the specific requirements – from simple measuring boxes to fully automated chambers. These measuring chamber solutions find a wide range of applications, such as in laboratories for EMC pre-compliance measurements, for functional testing of products or also for measurements in quality assurance. Depending on the application, the chambers can be used in a frequency range between 100 kHz and 110 GHz and provide an average shielding effectiveness of 60 to…
-
Full-Polyimide heater for particular applications
Beyond the standard heater with Kapton® insulation, Telemeter Electronic offers Full-Polyimide heating foils for your special application. The main difference is to replace the usual adhesive material with the primary material "KAPTON®". This process of layer construction and the realization of the connection according to IPC 2223 offers the following advantages: • -200°C to +300°C • UL 94V-0 • Increased reliability • Improved material properties • Halogen free material • Lower outgassing Über Telemeter Europe Telemeter Electronic has been a certified sales and service company since 1964, with a focus on solution oriented thinking and acting. We are technically competent partners for our customers and attach great importance to personal…
-
… efficient and professional thermoelectric cooling
There is no other component, which is more efficient if limited space and precise cooling is required. Peltier elements from Telemeter Electronic also ensure an efficiency, which is essential in many applications. Our elements are not only available as single components, but also assembled with heat sink and fan. Optimization of shape, size or performance is for your special series application is our daily business. Due to the change of the economic policy and further hurdles i.e. material procurement, leads to delayed shipments and thus also in some cases to production stops. To avoid any of these bottlenecks, Telemeter Electronic can support you by providing decent delivery times, large stock…
-
RF switch with 4.3-10 connector – Always a reliable connection
The 4.3-10 connector is increasingly used in many mobile radio applications. It was originally developed to meet the growing performance requirements of mobile radio networks. It is used e.g. for the connection from the remote radio unit to the antenna, but also for splitter or filter systems. Due to this increased demand, Telemeter Electronic has further developed its TEleRel RF switches. Two important switch series are now also available with 4.3-10 connectors as a ready-to-connect solution. The 4.3-10 connector is now available for SPDT as well as SP3T to SP6T configuration. The SPDT switches are available in failsafe or latching version. The SP3T to SP6T series is available in Normally…
-
Heating foils and cartridge heater with IP-classif¬ication
Especially in the food industry, heating cartridges and foils are used in context with clean environments, and the very strict hygiene guidelines in that industry. Therefore, it is mandatory to keep the machines clean with a high-pressure cleaner or similar cleaning solutions, which puts electrical equipment, like heating foils at risk. Silicone heating foils from Telemeter Electronic differentiate from the norm by an additional process step during production, which guarantees them to be waterproof. A special silicone adhesive is applied to the connection area and edges to meet the IP65 standard. Furthermore, an Epoxy/PDA composition is used to seal the connections. This composition is rated to withstand high temperatures and…
-
Expanding the horizon – new Telemeter Electronic RF relays up to 50 GHz
Telemeter Electronic has successfully established a broad series of electromechanical RF-switches in numerous demanding applications for quite some time now. These are well known and recognized in the market using the brand name “TEleRel”. In order to be prepared for future requirements, the company is now successively expanding the model variants and the maximum usable frequency range. The development started with the TR 02 series (SPDT switch) in the standard configuration, which can be used now in a wide frequency range from DC – 50 GHz. As a new additionally selectable configuration, an internal termination can be offered. Furthermore, Telemeter Electronic has also extended the frequency range of the TR03-TR06…
-
…up to high vacuum and beyond –
Only Materials with a low outgassing behavior are certified for a high vacuum environment of up to 10-8 mbar, which means PTFE, with its low outgassing behavior (average outgassing rate is 2×10-8 l/sec cm² post 24h) is the preferred isolation material of power cables for actors, signal cables for sensors, PTFE tubes or single wires in a vacuum environment. The material properties of PTFE only allow bound water Molecules and volatile hydrocarbons to outgass over time. Firmenkontakt und Herausgeber der Meldung: Telemeter Europe Joseph-Gänsler-Straße 10 86609 Donauwörth Telefon: +49 (906) 70693-0 Telefax: +49 (906) 70693-50 http://www.telemeter.info/ Ansprechpartner: Edna Seiler Marketing Telefon: 004990670693-60 E-Mail: eseiler@telemeter.de Weiterführende Links Originalmeldung von Telemeter Europe…
-
Flexible and compact measurement chambers – state-of-the-art measurement solution
Mobile measurement chambers are used by many companies to support the product development of electronic components and systems. In that environment, they are used for example for electromagnetic immunity and emission testing in EMC pre-compliance measurements. Caused by increasing safety requirements for critical components and systems for example in the medical industry, a 100% end-of-line test procedure is unavoidable. Telemeter Electronic designs and manufactures modular chamber solutions to address these demanding requirements. Using a very compact design the measurement chambers can be used quite flexible and location – independent in product development, manufacturing, lab or quality control. All measurement chambers are fully custom designed to meet a variety of applications…
