-
On – Off! Done! Secure!
In moments of stress on the construction site, every control knob can be one too many. That’s why Kaeser portable compressors with capacities from 11 m³/min and up are designed with a stunningly simple operating concept – a rotary switch. Operation could literally not be more straightforward. The new operating panel is fitted to Mobilair models M125, M171 and M255 with delivery volumes between 11 and 25 m³/min. Start-up and shutdown of the electronically controlled engine with EU Stage V / US Tier 4 emissions is performed simply and conveniently via a rotary switch control. All that is required to switch the machine on is to turn the red rotary…
-
Ein – Aus! Fertig und Sicher!
Wenn auf einer Baustelle Stress herrscht, kann jeder Handgriff zu viel werden. Deshalb sind Kaeser-Baukompressoren ab einer Leistung von 11 m3/min nun mit einem kinderleichten Bedienkonzept ausgestattet: einem Drehschalter. Einfacher geht es nicht. Verfügbar ist die neue Bedientafel für die Mobilair Modelle M125, M171 und M255, mit Liefermengen zwischen 11 und 25 m³/min. Das An- und Ausschalten der elektronisch geregelten Motoren mit EU-Abgasstufe V bzw. US-Abgasnorm Tier 4 erfolgt simpel über einen Drehschalter. Um die Anlage zu starten, wird einfach der rote Drehschalter von links nach rechts gestellt. Die Steuerung geht an, der Motor startet, der Motor läuft warm und anschließend fördert der Kompressor die gewünschte Druckluft. Der Stopp der…
-
Low Pressure 4.0
Intelligent and straightforward blower control: the Sigma Air Manager 4.0 is the solution for blower station automation. This sophisticated controller delivers maximum energy efficiency and cost savings whilst making the station ready for Industrie 4.0 applications. The Sigma Air Manager 4.0 is the core component of a blower station and the key technology needed in order to take advantage of the Industrie 4.0 services of the future. It acts as the central mastermind and controls the individual machines with maximum efficiency whilst perfectly adjusting the flow capacity to match flow rate demand. All it needs from the process control system is the desired differential pressure value – the SAM 4.0…
-
Kaeser Kompressoren
Established in 1919 as a mechanical engineering workshop, Kaeser Kompressoren is a family-owned business and today is one of the world’s leading compressor manufacturers and compressed air systems providers. Kaeser’s production centres are located in Coburg (main plant), Moringen and Gera, Germany. The company approximately 7000 employees worldwide. Kaeser’s comprehensive product range comprises stationary and portable rotary screw compressors, stationary and mobile reciprocating compressors, vacuum pumps, rotary blowers, rotary screw blowers, turbo blowers, filters, dryers, air tools and accessories. Furthermore, Kaeser’s state-of-the-art compressor control systems with advanced IT technology take compressed air efficiency to the next level and beyond. Both users and the environment therefore benefit from the consequent energy-savings.…
-
Peak performance at high flow rates
GBS rotary screw blowers set a new benchmark in compressor technology for the 75 to 160 kW power range, with a flow rate from 22 to 104 m³/min and differential pressures up to 1100 mbar. These machines not only feature exceptional control characteristics, quiet operation, an optimised footprint and low maintenance requirements – they also deliver consistently high efficiency across the entire control range. The efficiency of GBS rotary screw blowers remains consistent across the control range, rather than just at certain points – which will make this machine an especially attractive alternative to turbo compressors. This new blower for the low-pressure range draws on Kaeser’s many decades of expertise…
-
Pure efficiency
The FBS rotary screw blower from Kaeser represents the next milestone in the development of oil-free compression blower technology and for bulk material applications. With a flow rate of 18 to 72 m³/min and pressure differentials from 0.3 to 1.1 bar, as well as a selection of motors ranging from 45 to 110 kW, the innovative FBS continues the success story of its smaller sibling, the EBS, whilst setting new standards in terms of energy efficiency, space-saving design and automation. The SFC version is equipped with a frequency converter and a synchronous reluctance motor – a slip-free design that combines all the advantages of high-efficiency permanent-magnet motors with those of…
-
Quiet and efficient
The DBS-series screw blowers promise big energy savings. With power ratings from 15 to 37 kW and flow rates from 4 to 22.5 m³/min, they are currently the most efficient screw blowers available. Like the other Kaeser screw blower series, the DBS screw blowers deliver unparalleled efficiency. They are up to 35-percent more efficient than conventional rotary blowers and also provide energy savings in the double digit range compared with many commonly available screw and turbo blowers. These benefits are made possible in no small part by the proven Sigma Profile rotor technology used in the rotary screw compressor sector. Another key factor is the innovative non-slip direct drive with…
-
Integrated energy and cost efficiency
Kaeser completes its blower product portfolio with the BBC and FBC series. These compact rotary blowers are ready to connect with integrated mains power supply equipment and the proven Sigma Control 2 controller for comprehensive system monitoring and communication. Kaeser’s high-efficiency, energy-saving rotary blower range now covers air deliveries from 2 to 72 m³/min at up to 1000 mbar gauge pressure and 500 mbar vacuum. Key applications for these blowers include pneumatic conveying. "Ready-to-connect" means that the units are supplied complete with all sensors, controls and a choice of star-delta starter or variable speed drive. The complete system packages are CE and EMC certified, which means less work for both…
-
High-efficiency: Compressed air for jet milling applications
When it comes to generating compressed air, operators of jet milling equipment for the production of very fine powders can achieve significant energy cost savings through the skilful use of heat recovery. It is for this very reason that Kaeser has recently expanded the options palette for its range of oil-free compression rotary screw compressors from the CSG, DSG and FSG series. Aside from steam, jet mills are most commonly operated using nitrogen or compressed air. In the case of the latter, heat energy can be recovered from the compressed air inside the jet nozzles and subsequently reused for the milling process. Exhaust heat arises as a by-product of compressed…
-
Space-saving, efficient compressed air production
No matter whether for a smaller business where space is at a premium, or a larger business requiring a decentralised compressed air supply, Kaeser’s compact Aircenter systems are the perfect choice for an efficient and environmentally-friendly source of quality compressed air. With a minimal footprint of approximately 1m², these energy saving systems are available for flow rates from 0.34 to 2.7 m³/min and also provide application-specific compressed air treatment and storage. All Aircenter models are characterised by their exceptional efficiency. At the heart of the two largest models, the Aircenter 22 (11 kW) and the Aircenter 25 (15 kW). is an optimised SK series rotary screw compressor from Kaeser. With…
